NX-1200/1300

product image

Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM
analog protocols
Choose from direct & intuitive LCD with standard keypad or basic enclosures
Easy visible Display: 8-digit LCD models featuring high-contrast, white backlit LCD
Large 7-Color LED indicator on the top panel
Selective Power-on LED
Selective Call Alert LED
Battery Level Indication
Multi-status function indication
RF output power 5W both on VHF/UHF
Mixed Zone - analog and digital
Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable
digital processor
Audio Equalizer: Flat, High, Low
Auto Gain Control: On, High, Low, Off
Noise Suppressor
Microphone type settings
Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi,
Normal Scan
VOX & PTT –triggered Semi- VOX, Voice-operated TX
Emergency Function: Customizable Emergency Profile
Lone Worker
Max / Min Volume setting & Volume control
Voice Announcement
Remote Stun / Kill / Check
Front Panel Programming Mode (for Keypad model)
Electronic Serial Number (ESN)
MIL-STD-810 C/D/E/F/G
IP67
Intrinsically safe option (Available later)

Technical Details
General NX-1200 NX-1300
Pre-set Frequencies Type 1 136-174 MHz 450-520 MHz
Type 2 400-470 MHz
Max. Channels per Radio 260 (64 for basic model)
Number of Zones 128 (4 for basic model)
Max. Channels per Zone 250 (16 for basic model)
Channel Spacing Analog 30*1 / 25*1 / 15 / 12.5 kHz
Digital 12.5 / 6.25 kHz
Power Supply 7.5 VDC ±20 %
Battery Life DMR Analog/NXDN
KNB-84L (1900mAh) Approx. 14.5 hours Approx. 11 hours
KNB-69L (2550mAh) Approx. 19 hours Approx. 14 hours
Operating Temperature(Radio only)*2 -30°C to +60°C
Frequency Stability (-30 to +60°C; +25°C Ref.) ±0.5 ppm
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections Not Included
Radio with KNB-84L 54 x 123 x 33.5 mm
Weight Radio Only 175 g
Radio with KNB-84L 295 g
FCC ID Type 1 K44501000 K44501101 (pending)
Type 2 K44501100
IC Certification 282F-501000 282F-501100
Receiver NX-1200 NX-1300
Sensitivity NXDN® @ 6.25 kHz Digital (3% BER) 0.18 μV
NXDN® @ 12.5 kHz Digital (3% BER) 0.22 µV
DMR® @ 12.5 kHz Digital (1% BER) 0.25 µV
DMR® @ 12.5 kHz Digital (5% BER) 0.18 µV
Analog @ 12.5/25 kHz (12 dB SINAD) 0.24 µV / 0.20 µV
Selectivity Analog @ 12.5 / 25 kHz 68 dB / 74 dB
Intermodulation Distortion 70 dB
Spurious Rejection 70 dB
Audio Distortion 7%
Audio Output Power 1 W / 12 Ω (Internal Output)
Transmitter NX-1200 NX-1300
RF Power Output (High / Low) 5 W / 4 W / 1 W
Spurious Emission -70 dB
FM Hum & Noise Analog @ 12.5 / 25 kHz 40 dB / 45 dB
Audio Distortion 2%
DMR Digital Protocol ETSI TS 102 361-1, -2, -3
Emission Designator 16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D, 7K60FXD, 7K60F7W

*1 25 / 30 kHz in VHF/UHF Bands excluding T-Band are not included in the models sold in the USA or US territories.
*2 Operating temperature specification for a Li-ion battery is -10°C to +60°C [14°F to +140°F].Analog measurements made per TIA603. Specifications are measured according to applicable standards.Specifications are subject change without notice, due to advancements in technology.

FleetSync® is a registered trademark of JVCKENWOOD Corporation in the United States and/or other countries.NXDN® is a trademark of JVCKENWOOD Corporation and Icom Inc.NEXEDGE® is a registered trademark of JVCKENWOOD Corporation.All other trademarks are the property of their respective holders.

MIL-STD & IP
MIL Standard MIL 810C Methods/Procedures MIL 810D Methods/Procedures MIL 810E Methods/Procedures MIL 810F Methods/Procedures MIL 810G Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain* 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Prcedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV
International Protection Standard
Dust & Water Protection* IP67 All interfaces must be fully sealed with appropriate covers or by designated genuine accessories.
Water & Dust tighten IP67 models equipped with designated genuine batteries are [M] and [X] types only. (for Asia/Oceania)